Motorbike Gear Maintenance — How to Clean, Check and Store Your Kit
After a wet ride, it’s tempting to put the helmet in its bag, leave the gloves by the radiator and deal with everything tomorrow. The next morning, the gloves may still feel damp inside and the visor still has yesterday’s road spray on it. A few minutes spent putting things away properly makes getting ready for the next ride easier.
Good motorbike gear maintenance starts with three habits. Check what gets worn, clean each item according to its instructions and let damp kit dry before storing it. Those habits work for a helmet, leather jacket or pair of motorcycle jeans, even though the right way to clean each one can be very different.
Start With a Simple Motorbike Gear Maintenance Routine
Give the kit a quick look when you take it off. You’ll remember which fastening stuck or where the rain got in. Pull out the care instructions before a deeper clean, particularly if you’re working with a waterproof membrane, mixed materials or removable armour.
- After a wet ride, open up damp kit and dry it as the manufacturer directs before putting it away.
- Before the next ride, check that the visor is clear and the fastenings you rely on still work.
- Before a full wash, read the label, empty the pockets and check which liners or protectors the manufacturer wants you to remove.
Give wet kit somewhere it can hang without touching everything else. For everyday motorbike gear maintenance, it helps to be able to see what’s drying. You’re less likely to pack away a glove or boot that still feels damp inside.
Keep a clean visor cloth separate from the one you use on boots and luggage. Road grit can get caught in a cloth even when it looks clean. If you use different products for leather, textiles and the visor, keep them with the relevant kit. That makes motorbike gear maintenance easier when everything comes home dirty at once.
Motorbike Gear Maintenance for Helmets and Visors
The visor often needs attention before the rest of the helmet. Start with the instructions for the shell and visor. Soften dried insects or road dirt as the manufacturer recommends, then lift the grime gently with a clean, soft cloth. Check which cleaners are suitable for the visor and any coatings or inserts. Solvents and household glass cleaners can damage some helmet components. The Department for Transport’s SHARP helmet care guide also advises replacing a scratched visor because oncoming headlights can cause dazzle.
If the cheek pads and comfort liner are removable, follow the manual for taking them out and putting them back. Allow the parts to dry fully and check that their fastenings seat securely when refitted. If the lining is fixed, use the cleaning method specified for it. SHOEI’s maintenance guidance distinguishes removable padding, fixed interiors and the impact-absorbing foam underneath. Our helmet odour guide covers how to deal with lingering smells.
Check the chin strap and buckle and make sure the visor closes securely. If the helmet took an impact while you were wearing it in a crash, replace it. Damage can be hidden inside the helmet. If you’ve dropped an empty helmet onto a hard surface, see SHARP’s helmet replacement advice.
Motorbike Gear Maintenance for Leather and Textile Jackets
For leather, check the label before using a cleaner, conditioner or waterproofing treatment. Some garments combine several finishes and materials, so a product suitable for the main panels may be unsuitable for trim or stretch sections. Use the gentle cleaning method the maker specifies. Dainese’s leather care guide, for example, recommends drying its garments in a ventilated place away from direct heat. Our guide to motorcycle leather gear covers construction and wear points in more detail.
For textile jackets, motorbike gear maintenance starts with identifying what can come out. Some jackets have a removable thermal liner or waterproof layer. Others have a bonded membrane. Remove protectors and liners as directed, then check the approved detergent, wash cycle and drying method. Before wearing the jacket again, make sure the protectors are dry and seated in the correct pockets.
If water stops beading on the outer fabric, check the garment maker’s reproofing instructions. The water-repellent finish on the outside and the waterproof membrane underneath do different jobs. A soaked-looking outer face can mean the finish needs attention. GORE-TEX outerwear care guidance explains how to care for that finish on compatible products. Use the jacket’s instructions to decide whether a spray, wash-in treatment or heat is appropriate.
Cleaning Riding Trousers and Armoured Jeans
Motorbike gear maintenance for trousers starts before they go in the wash. Check the hems, seat and seams for wear. Note where any adjustable knee protectors sit, then remove the armour as directed. A quick photo can help you put the protectors back at the same height afterwards. Follow the separate care instructions for the protectors themselves.
For GHC Sportswear™ Retail’s men’s Kevlar® motorcycle jeans, the shop’s care instructions say to remove the knee and hip protectors, empty the pockets, fasten the closures and turn the jeans inside out. Where the sewn-in label permits machine washing, use a gentle cycle at up to 30°C. Air-dry the jeans as directed and refit the protectors when everything is completely dry.
Once the armour is back in, check both sides before riding. Close each pocket properly and sit in your riding position to make sure the knee protectors are where you expect them. Our guide to motorcycle CE ratings explains the separate ratings for the garment and its protectors.
Motorbike Gear Maintenance for Gloves and Boots
Gloves can look dry on the outside while the fingertips and lining still feel damp. Open the wrist fastenings and follow the maker’s instructions for airing them. For cleaning, check the exact model, especially if it combines leather, textiles and a waterproof liner. REV’IT!’s glove care instructions, for example, specify hand cleaning for its gloves.
As part of regular motorbike gear maintenance, check the palms, thumb seams and wrist straps for wear. Fasten the gloves and move your hands as you would on the bike. If the closure slips or a seam opens when you grip, take the pair out of use and ask the manufacturer whether it can be repaired. Our motorcycle glove guide covers fit and fastening checks for a replacement pair.
For boots, clear grit from the soles and check the fastenings before storing them. Look for tread worn smooth, a sole starting to lift or a zip that opens under tension. Dry damp boots slowly as the maker directs. REV’IT!’s footwear care guide gives separate advice for different materials and recommends room-temperature drying for its footwear.
Drying and Storing Kit Between Rides
Give heavier kit enough support when you put it away. A sturdy hanger can hold a jacket or suit without forcing it into a sharp fold. Store the helmet on a stable shelf where it has room around it. If you use a helmet bag for dust protection, wait until the lining is dry. The drying part of motorbike gear maintenance often takes longer than the cleaning, especially around glove fingertips and inside boots.
If the kit is going away for a season, empty the pockets, check that detachable parts are accounted for and keep the instructions somewhere you can find them. Before the first ride back, try the kit on together. Check that it still fits with your usual layers and that the fastenings work. That bit of motorbike gear maintenance is easier to do at home than just before you’re due to meet friends for a ride.
A Quick Check for Earplugs, Luggage and Covers
Small items are easy to miss when you do motorbike gear maintenance. Clean reusable earplugs only as directed and store them dry in a clean case. Replace disposable plugs according to their instructions. If you use separate goggles, check their strap and lens as well as the visor you normally use.
Include your tank bag in motorbike gear maintenance, particularly where it attaches to the bike. Check the mounting points, straps, buckles and zips. If you’ve removed it for cleaning, make sure it sits securely and clears the controls when you refit it. Air out a wet bike cover before folding it, and check whether a tear or worn fastening is making it difficult to secure. Our motorbike accessories guide explains what to look for if one of these items needs replacing.
When Motorbike Gear Maintenance Means Taking Kit Out of Use
A useful motorbike gear maintenance habit is to set damaged kit aside as soon as you spot it. A damaged helmet fastening, a split protective seam or a protector that moves out of place affects how the kit works. Follow the manufacturer’s guidance on inspection, replacement or approved repair. If clothing has been involved in a crash, check the seams, closures and protector pockets as well as the area that touched the road. A specialist can assess damage that is hard to judge at home.
Make motorbike gear maintenance part of putting the bike away. Clean what needs cleaning, set wet kit out to dry and deal with damage before the next ride. When you put the kit back on, the visor should give you a clear view, the fastenings should work as expected and the armour should sit where it belongs.
Follow GHC Sportswear™ Retail on Facebook and Instagram.
Ride smart. Gear up. Know your CE.
Written by the GHC Sportswear™ Retail Team
Trusted by riders who want protection without the blah.


